Every site needs a clear edge. A fence tells the public where the work area starts, gives the crew one controlled way in and out, and helps keep materials and equipment where they belong. The real question on most jobs isn't whether to fence — it's which kind, for how long, and where the gates go.

EleFence sets up jobsite perimeter fencing for construction sites, GCs, home builders, utility laydown yards, and storage lots across Greater Cincinnati and SW Ohio. Here's how we think through it with customers.

Temporary Chain Link: Built for the Length of the Job

Temporary fencing is freestanding or lightly anchored chain link that goes up when the work starts and comes down when it's done. It's the usual pick when:

Permanent Chain Link: For Yards and Lots That Stay

Permanent chain link has posts set in the ground, top rail, and tensioned fabric. It makes more sense when:

Simple way to decide: if the fence should leave when the project does, go temporary. If the fenced area is part of how you run your business, look at permanent. Plenty of customers use both — permanent around the home yard, temporary at each active jobsite.

Gates Matter More Than Footage

The fence line is the easy part. The gates decide whether the site actually works day to day. Before we set anything, we'll want to know:

A gate in the wrong spot means trucks backing in off the street or crews leaving the site open because closing it is a hassle. Getting this right up front saves headaches for the whole job.

Planning the Layout

A few things to think through before the fence goes up:

  1. Property lines and right-of-way. Know where your site ends, especially along sidewalks and streets. Some locations have local rules about fencing in public areas, so check with your municipality or permit office if you're close to the line.
  2. Utilities and access points. Keep meters, hydrants, and utility access where the people who need them can still reach them.
  3. Staging and laydown. Fence the area where materials actually sit, not just the building footprint.
  4. Phases. If the site will grow or shrink, plan the first layout so panels can move without starting over.

Existing Fence on Site? Fix It First

Sometimes the yard already has a perimeter that's been hit, cut, or worn out. Before adding new fence, it may make more sense to repair what's there — reset posts, patch fabric, and fix gates that won't latch. That's our fence restoration work, and it often shows up in the same conversation as new jobsite fencing.

Adding Cameras to the Perimeter

A fence marks the boundary and slows people down, but it can't tell you what happened overnight. Some customers pair their perimeter with a monitored camera trailer from the EleFence Security Division for after-hours eyes on the site. No fence or camera can promise nothing will ever go missing, but the two together give you a clearer boundary and a record if something does happen.

What to Send for a Quote

You'll get a faster, more accurate quote if you can share:

Need a jobsite perimeter?

EleFence sets up temporary and permanent chain link for construction sites, GCs, home builders, and yards across Greater Cincinnati and SW Ohio — with gates built around how your site actually runs.

See Jobsite Fencing

Want after-hours coverage too? See the Security Division, or request a quote.

Questions? Call us at (513) 376-2877 or email hello@hireelefence.com. We serve Greater Cincinnati and SW Ohio.